Classification: fine concrete pumpOrder hotline: 15131066788
Introduction and parameters
Introduction of small concrete pump products:
Small concrete pumpIt is composed of pump body and conveying pipe.It is a kind of machine that uses pressure to continuously transport concrete along the pipeline. It is mainly used in building construction, bridge and tunnel construction.It is mainly divided into gate valve concrete delivery pump and S valve concrete delivery pump.The other is to install the pump body on the vehicle chassis, and then equipped with telescopic or folding cloth poles, and the pump truck.
Performance characteristics of small concrete pumps:
1, ground heating construction using fine stone concrete pump: pumped fine stone concrete, for the construction of ground heating.
2, the use of long life reversing valve, so that good sealing, high output pressure, and can be used in high-rise building construction.
3. PLC control system is adopted to make the control performance better.
4. The function of anti pump is designed to make it easy to clean up the pipeline.
5, the whole machine adopts air cooling design, which is easy to use and no need for water supply.Equipped with centralized lubrication system to extend the service life of the whole machine.
6, the whole machine is equipped with walking wheels, mobile, flexible and convenient, equipped with vibrating motors, making the whole machine more efficient, convenient, and ground heating construction with fine stone concrete pump.
Safe operation of small concrete pumps:
1. The use of the automobile chassis, internal combustion engines, air compressors, water pumps and hydraulic devices that make up the fine concrete pump shall be operated in accordance with the requirements of horizontal transportation machinery, power plant and hydraulic machinery safety. 2, the location of the pump car should be flat and solid, with no barrier around it and no high-voltage transmission lines over it.The pump truck must not be placed on the slope. 3. When the pump truck is in place, it should support the outrigger and maintain the level and stability of the fuselage.When feeding with a cloth pole, the inclination of the fuselage should not be greater than 3 degrees. 4. After setting up, the fine concrete pump should show the stop lights to avoid collision.
Common accidents in the use of small concrete pumps:
1. funnel position of pump truck There are many accidents every year.For example, when a pump truck stirs up a hopper failure, the operator needs to clear the concrete in the hopper. If someone mistakenly operates the machine, the cleaning personnel will be injured. When the mixing device fails, the maintenance personnel will repair the mixing device in the hopper, and when the other person begins to test whether it is repaired, the maintenance personnel will be injured. 2. rollover When the concrete pump expands, the four supporting legs will support the weight of the whole pump truck and the volume of concrete truck being worked. If the construction site is not smooth enough, the truck's legs will be forced to unbalance, and it will roll over. 3. pump trucks tend to overturn when receiving vehicles. There have been many accidents of pump overturning caused by misoperation. When the casting task was completed, the operators were eager to close the work, and when they did not retrieve the boom, they began to reclaim their outrigger, causing a rollover accident. 4. electric shock Similar to the electric shock accident of a crane.Because the concrete pump needs to raise its height when the cloth is operated, the boom is easy to approach the high voltage wires near the construction site, causing electric shock accidents. 5. cloth operation In the course of cloth operation, the operators of concrete pump are not in good coordination with the builders of cloth placement. If the two sides violate the rules of operation, it is easy to cause accidents.
Mobile website scanning access
Copyright Handan Engineering Equipment Co., Ltd. Ji ICP 15016726.
Company address: Jize County Development Zone, Handan County, Hebei Province
Company Tel: 15131066788 / 18931616037
Company fax: 0310-7666888 company email: firstname.lastname@example.org