菠萝蜜视频app在线观看

Your location: Home Page > Mortar conveying pump > Fine aggregate concrete pump
 Fine aggregate concrete pump truck XHBT50

Fine aggregate concrete pump truck XHBT50

Classification: fine concrete pump Order hotline: 15131066788

Introduction and parameters

HBT-50 performance characteristics:

The product adopts double pump and double circuit open type hydraulic system. The main pumping oil way and the S valve swing oil way are independent of each other, which makes the system simple, the component life prolongs, the reliability is higher, and is easy to troubleshooting and eliminating.
The outstanding characteristics of the electric control system are advanced technology, simplicity and high reliability.
More than 90% of the electrical components are imported, ensuring the reliability of the components. Compared with similar products in China, the electronic control system is simple, with a small number of components and high reliability.
Equipped with wired remote control device to facilitate remote operation.
Wearing parts such as spectacle plate and cutting ring, after continuous technical research, have long service life, and the service life can reach up to 20 thousand party when pumped.
A centralized automatic lubrication system is adopted in the lubrication system. Pressure increment and impurity filtration are installed at the outlet of the lubricating pump to ensure that the lubrication system is more reliable.
The forced air cooling large radiator device ensures that the working temperature of the hydraulic system is controlled below 60 degrees, thereby ensuring that the main engine hydraulic system is in normal working condition.


XHTB40 technical advantages of Hanshi fine concrete pump truck:

1. Han fine concrete pump is a mortar conveying equipment specially developed for the characteristics of floor heating. It is suitable for large area and high efficiency construction of fine stone concrete filling layer or mortar filling layer in ground heating engineering. It also applies to transportation of fine aggregate concrete, transportation of fire-resistant and thermal insulation materials, and transportation of greening soil in the construction of ecological environment.
2. Han fine stone pump can choose 80 and 100 conveyance pipe, which can transport concrete below 3cm.
XHTB40 performance characteristics of Hanshi fine concrete pump truck:

1. the advanced S pipe valve reversing can meet the transportation of fine aggregate concrete.
2. the eyeglass plate and the cutting ring are made of high hardness and wear-resistant alloy materials with longer service life.
3. the imported main oil pump has high outlet pressure, which can meet the transportation requirements of high-rise buildings and long distance construction.
4. hydraulic oil cooling adopts air cooling system, which has good cooling effect and easy operation.
5., with anti pump function, when the concrete collapses are not good, the pipe blockage can be reduced to a large extent.
6. equipped with automatic centralized lubrication system, lubricating oil is allocated to all parts to ensure service life of rotating parts.
7. the electrical box is equipped with MITSUBISHI electrical components and equipped with wireless remote control handle, which is stable and easy to operate.


XHTB40 product configuration of Hanshi fine concrete pump truck:

I. hydraulic system

The application of the new electronically controlled commutation technology makes the pumping work more reliable and the failure rate of the hydraulic system is lower.

Two, power system
   
The motor micro stone pump adopts the famous brand SIEMENS motor at home and abroad. The diesel engine fine stone pump uses the low energy consumption and high efficiency Tianjin Lei Yu and Yuchai brand.

Three. Main oil pump
   
The imported Kawasaki main oil pump is adopted. The main oil pump is controlled by electric discharge and the pumping speed is adjustable. Long life, strong and powerful work, can work continuously for 24 hours, the joint venture brand constant power variable piston pump, constant power control to effectively prevent motor and diesel overload, higher than conventional gear pump under higher pressure and load.

Four. Heat dissipation system
   
The air-cooled or water-cooled dual cooling system can ensure the stable operation of equipment under severe weather conditions such as high temperature and severe cold.

Five. Electronic control system
   
The main electrical appliances are equipped with the MITSUBISHI PLC control system, equipped with wireless remote controller, which is stable and easy to operate.

Six, S pipe valve
   
The S tube valve is made of high manganese steel by integral casting. The wear-resistant surface is made of wear-resistant material. It has the advantages of high pressure resistance and wear resistance. The inner cavity is smooth and smooth, the flow of concrete is smooth, and the pumping performance is further improved. The spline shaft uses alloy material for special surface treatment, which improves wear resistance and fatigue strength.

Seven. Spectacle plate and cutting ring.
   
The eyeglasses and cutting rings are made of cemented carbide and are durable.

Eight, hydraulic pipe joint
   
The hose is made by Italy horse, United Eaton and hose fittings are supplied by Eaton.

Online Message